Product FAQ´s LanExpert
The Frequently Ask Questions are organized into their respective sections as they pertain to the LanExpert.
CABLE TEST
Question
Under length mode, why do I get funny readings on pins 78?
Answer
Please make sure that the far end of the cable connected to the LanExpert is disconnected from the wiremap terminator or a network device.
Question
Can I measure cables other than network cables?
Answer
The LanExpert only measures copper network cables (ie. CAT3, 5, 5e, 6 and 6e) that have a NVP of 65 to 74.
Question
When I measure a patch cord, do I need to plug both ends into the LanExpert ports?
Answer
To measeure length plug one end of your cable into Port 2. Port 2 is marked on the LanExpert with a yellow outline. The other end of the cable should not be connected to anything. Make sure nothing is connected to Port 1 while making the measurement. Select start to measure the cable.
Don't see the question or answer that fits your issue?
Send us your question and we'll respond with an answer.
